XPS foam board production line
The supercritical carbon dioxide foaming XPS production line is a type of production line used to produce XPS (extruded polystyrene) panels.
Supercritical CO2 foaming XPS production line.
The supercritical carbon dioxide foaming XPS production line is a type of
production line used to produce XPS (extruded polystyrene) panels. This
production line uses supercritical carbon dioxide (CO2) as a foaming agent. By
heating the CO2 gas to a supercritical state, it is dissolved in the polystyrene
resin to form bubbles, thereby achieving the foaming forming of the panel. Its
advantages include the following aspects:
-
Better control of the uniformity and quality of the material, reducing the
defect rate of the product; -
It has high flexibility and adjustability, and can adapt to the production
needs of different materials and products; -
The upgrade of the control system makes the operation of the production
line more stable and reliable.
Parameter Table
|
Model |
Capacity(kg/h) |
Transformer Required |
|
KFTS-65/150 |
200-350 |
250 KVA |
|
KFTS-75/160 |
200-450 |
300KVA |
|
KFTS-75/200 |
400-600 |
400KVA |
|
KFTS-85/200 |
500-800 |
450KVA |
|
KFTS-95/250 |
800-1200 |
550KVA |
|
KFTS-110/300 |
1000-1500 |
600KVA |
Related products
-
Used NSC Schlumberger FM7N Spinning Machine
Contact UsThe company was established in Zhangjiagang, Jiangsu, China in 2005 .Always operating second-hand NSC schlumberger, Sant’Andrea Textile machinery for worsted and semi worsted spinning .
-
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs!
Reviews
There are no reviews yet.