VMC 500 CNC Vertical Machining Center
The machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
https://www.josencnc.com/VMC-500-CNC-Vertical-Machining-Center.html
1.This model is suitable for communication, medical equipment, power tools, automation parts, 3C products processing.
2.The main features of the machine are compact and flexible, fast displacement speed, high spindle speed, fast drilling and tapping, fast tool change, mainly used for processing light and small metals, not suitable for heavy cutting.
3.The three axes use ball screw and linear guide imported from Taiwan, with high rigidity, low noise, low friction and high sensitivity, which can improve the processing speed and accuracy.
4.Spindle short nose end design, the spindle motor transmission power to the maximum, cutting rigidity is excellent, improve the machining accuracy and extend the service life of the spindle.
5.The fully enclosed guard keeps smooth and low noise when moving at high speed, and isolates the chip liquid and chips to the greatest extent, so that the maintenance and service life of the wire rail and screw can reach the best state.
6.Z-axis is designed without counterweight, and the power of servo motor is deployed and the driving function of z-axis is improved to achieve high speed and the best surface finish of the product.
| ITEM | UNIT | TV-500 |
| Travel | ||
| X-axis travel | mm | 500 |
| Y-axis travel | mm | 400 |
| Z-axis travel | mm | 350 |
| Worktable size | ||
| Working table size (X*Y) | mm | 650×400 |
| Max.loading capacity of working table | kg | 250 |
| Table T-slot size (width * number of slots * spacing) | number | 14x3x125 |
| Spindle | ||
| Spindle speed | rpm | 20000 |
| Spindle drive form | Direct driven | |
| Spindle power | kW | 3.7/5.5 |
| Spindle bore specification | BT30 | |
| Distance from spindle to table surface | mm | 150-500 |
| Spindle feed | ||
| Rapid feed rate(X,Y,Z) | m/min | 48/48/48 |
| Cutting feed rate | mm/min | 10000 |
| Tool magazine(Optional) | ||
| Tool magazine capacity | arm type 21 | |
| Tool diameter/adjacent tool space | mm | Φ80/Φ80 |
| Max. Tool length | mm | 200 |
| Max. Tool weight | kg | 3 |
| Accuracy | ||
| Positioning accuracy | mm | ±0.005 |
| Reproduction accuracy | mm | ±0.003 |
| Others | ||
| Controller | kg/cm² | 0i-MF/M80 |
| Air pressure demand | kg/cm2 | 6 |
| Power demand | kVA | 20 |
| Machine weight | T | 2.8 |
| Model | A | D | E | F | G |
| TV-500 | 1630 | 2270 | 2270 | 2100 | 350 |
 |
|||||
| Model | A | B | C | D | E | F | G | H | I | J | K | T |
| TV-500 | 650 | 400 | 75 | 125 | 125 | – | – | 14 | 25 | 10 | 24 | 3 |
 |
||||||||||||
Related products
-
Waste Tyre Recycling Production Line
Contact UsPresently, waste tire recycling equipment provided by our domestic competitors usually can produce 20-40 meshe rubber powder under normal temperature.
-
OPTIMIZING CROSS CUT SAW MAXCUT F18S+SENSIT 005
Contact UsHigh speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line. -
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs! -
High-efficiency activated carbon attachment device
Contact UsHigh-efficiency activated carbon attachment device can quickly absorb pollutants in exhaust gas. The exhaust gas containing pollutants is powered by a fan and enters the activated carbon adsorber under negative pressure.
Reviews
There are no reviews yet.