Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
This is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine Characteristics:
1. Very strong and long life: Screw and barrel are made of 38CrMoAlA, inlet mouth treated with special alloy.
2. Easy operation: It has automatic constant temperature control and stable performance. After adjusting well, 1 or 2 workers are enough to run this machine, to feed the materials and change pellet receiver.
3. Low cost in using after redesign:Now this kind machine is more economic in electric power source and also water. In the long working life of this machine, it can save many sources in energy!
4. High output, long operating life and lower noise: it’s the ideal waste plastics regenerative pelletizer machine for nowadays.
Specifications of machine:
|
Model |
Motor power(KW) |
Capacity(Kg/h) |
Screen changer |
|
SJ75 |
7.5-15KW |
30-60KG/H |
Optional |
|
SJ90 |
11-18.5KW |
50-120KG/H |
Optional |
|
SJ120 |
22-30KW |
70-180KG/H |
Optional |
|
SJ150 |
45-55KW |
150-260KG/H |
Optional |
More pictures of machine:
Related products
-
SWFP Fine Grinding Hammer Mill
Contact UsSWFP series hammer mill is mainly applicable to coarse grinding and fine grinding in grain and feed processing, the equipment adopts ultra-wide multi-cavity structure, large screen area, uniform mater
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs! -
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
Reviews
There are no reviews yet.