Customizable MK7660GZ Double End Grinding Machine
Type: double end grinding machine
https://www.grinderprecision.com/MK7660GZ-Double-End-Grinding-Machine.html
Type: double end grinding machine
Grinding Wheel Spindle: diamond disc CAM
Control System: siemens 828D
Processing Mode: fully automatic
Precision: high precision
Certification: GS, CE, ISO 9001
Customisation: upon request
Place of Origin: Wuxi, China
Machining Accuracy Grade: P4/P5
External Dimensions: 2880mm*1550mm*1650mm
MOQ: 1 set
DM: 4 months
Packaging: three-ply board
Working range
|
Machine model |
Range(mm) |
Working accuracy |
Total Power (kw) |
Weight (kg) |
Overall Dimensions (cm) |
||
|
D |
d |
Parallelism difference (mm) |
Height difference (mm) |
||||
|
MK7660GZ |
7～60 |
6～70 |
0.001 |
0.02 |
110 |
10000 |
2880x1550x1650 |
MK7660GZ Double end grinding machine accuracy
|
NO. |
Item |
Required Precision |
|
1 |
Resiplus |
0.08-0.12 mm (diameter direction) |
|
2 |
Divergence (before grinding) |
0.025 mm |
|
3 |
Parallel Deviation (before grinding) |
0.01mm |
|
4 |
Parallelism (before grinding) |
0.01mm |
|
5 |
Height Difference (before grinding) |
0.1mm |
|
6 |
Divergence (after grinding) |
0.005mm |
|
7 |
Parallel Deviation (after grinding) |
2um |
|
8 |
Height Difference (after grinding) |
0.01mm |
|
9 |
Roughness (after grinding) |
0.32um |
Features and performance of this machine
MK7660GZ Double end grinding machine has strong rigidity and high accuracy. The left and right two grinding wheel shafts are beltless, and the permanent magnet synchronous shaft is adopted, and the left and right feed table is controlled by linear motor + Heidehan grating, and the control system is Siemens 828D.
Main uses
MK7660GZ Double end grinding machine is a high-precision double-end grinding machine with horizontal shaft and disk feeding. It is mainly used for grinding two parallel end surfaces such as inner and outer ring and roller of bearing. It is suitable for mass production of factory stand-alone machine or automatic line. The whole process of this machine is completed by Siemens numerical control.
Related products
-
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
12Kg Medium Torque Brushless Electric screwdriver Trigger start type
Contact UsBrushless DC voltage automatic medium torque electric screwdriver series
Model: GW-B6212LF
Torque: 2~12Kgf.cm
Free Speed: HI 2000 / LO 1500 r.p.m -
Waste Tyre Recycling Production Line
Contact UsPresently, waste tire recycling equipment provided by our domestic competitors usually can produce 20-40 meshe rubber powder under normal temperature.
Reviews
There are no reviews yet.