UT 1.7220/4130/30CrMo 4130 Hot Rolled Black Steel/ Cold Drawn Bright Steel Round Bar
UT 1.7220/4130/30CrMo 4130 Hot Rolled Black Steel/ Cold Drawn Bright Steel Round Bar
UT 1.7220/4130/30CrMo High hardenability, no tempering brittleness, good weldability, little tendency to form cold crack, good machinability and cold strain plasticity
| Steel Grade | 1.7220/4130/30CrMo |
| Dimension | Thick 10-800mm x Width210-810mm / Diameter Ø10-1000mm |
| Delivery Condition | HB≤197 |
| Surface Treatment | Black Surface / Milled Surface / Polished Surface |
| Production Condition | Two Sides Cut or Four Sides Cut |
| Stock Quantity | 1000 tons |
| Ultrasonic Test | Sep1921-84 D/D or E/e Under 100% Test |
| MOQ | 10 tonnes |
| Mill Sheet Certificate | Provided |
| HS Code | Hot Rolled:722830 Forged: 722840 |
| Technique | Hot Rolled / Forged |
| Lead Time | 7-10 days |
| Trademark | UTSTEEL |
Chemical Composition(%)
| C | Si | Mn | Cr | S | P | Mo | V | Ni | W |
| 0.30-0.37 | ≤0.4 | 0.60-0.90 | 0.90-1.20 | ≤0.03 | ≤0.03 | 0.15-0.30 | / | ≤0.30 | / |
Application
Suitable for making the high pressure tube and various fasteners, high grade carburized parts such as gear, shaft, etc., which works in non-corrosive media under temperature below 250 ℃ , and n a medium containing a mixture of nitrogen and hydrogen.
Related products
-
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
Contact UsThis is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
-
Capacity 1258ML Hot Filling Suitable For Krones Machine
Contact UsBottle Volume: 1258ml
Bottle Type: hot-filling bottle
Suitable Equipment: Krones
Packing Method: Standard packing for export. -
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
Reviews
There are no reviews yet.