MAX3485
HTC MAX3485 RS-485/RS-422 Transceiver
Features
Single 3.3V power supply
Compatible with +5.0V logic levels
Common-mode input voltage range: -7V to +12V
Tri-state output
Half-duplex version available
Supports up to 32 transceivers per bus
Data transfer rate: 10Mbps
Current limiting and thermal shutdown prevent driver overload damage
ESD specifications
±15KV IEC61000-4-2 air discharge
±8KV human body model
Description
The MAX3485 is a low-power half-duplex transceiver compliant with RS-485 and RS-422 standards. This integrated circuit incorporates a driver and a receiver, with the driver operating at unrestricted slew rates to achieve data rates up to 10Mbps. When the driver is disabled and in either no-load or full-load conditions, these transceivers consume only 120μA to 500μA of supply current. All devices operate from a single 3.3V supply. The driver features short-circuit current limiting and overpower protection via a thermal shutdown circuit (which places the driver output into a high-impedance state). The receiver input features a fail-safe characteristic, ensuring the output remains at logic high when the input is open-circuited. The device offers ±8kV human body model (HBM) ESD immunity and passes the IEC 61000-4-2 ±15kV air discharge test.
Related products
-
4.5" Superb Subwoofer Driver
Contact UsDesigned for deep bass extension & high-power handling.400W Peak Power: Robust output for home theater/car audio.Dual Spider Design: Enhances linearity, reduces distortion.
-
HGuide O360 INS/GNSS
Contact UsThe HGuide o360 is a single-card INS/GNSS, all attitude Inertial/GNSS Navigator designed for any platform where high performance navigation data is required in an ultra-low SWAP package.
-
HGUIDE i300 MEMS Inertial Measurement Unit
Contact UsThe HGuide i300 is a high-performance
MEMS-based inertial measurement IMU designed to meet the needs of applications
in a variety of markets, including agriculture, AUVs, industrial equipment, robotics, mapping, stabilization platforms, transportation, drones, and unmanned ground vehicles. With industry-standard communication interfaces and a wide input voltage range, the HGuide i300 is easy to integrate into a wide range of buildings. Extremely small size, light weight and low power consumption -
DS-RF Selective Formaldehyde module HCHO Module
Contact UsDS-RF selective formaldehyde module can detect HCHO, VOC, TVOC, t & RH at the same time.
Reviews
There are no reviews yet.