Clamping Cylinder (Bolt Type)
The clamping cylinder provides the clamping force. Due to the size of the model, the span of the cylinder diameter is relatively large, and the cylinder with a large cylinder diameter is produced by casting.
The clamping cylinder provides the clamping force. Due to the size of the
model, the span of the cylinder diameter is relatively large, and the cylinder
with a large cylinder diameter is produced by casting.
| Cylinder name | Bore range | Travel range | Rated pressure (Mpa) | Installation method |
| Clamping cylinder (bolt type) | 45～300 | 200～2000 | twenty one | Flange |
1. Tie rod type, the front and rear covers are fixed by a tie rod. Limited by
the tie rod, it is generally suitable for small oil cylinders. Although the wall
thickness is the thinnest, under the same specification, the external dimensions
will be too large, and the space waste is serious.
2. Bolt type, the front and rear covers and the cylinder barrel are connected
by bolt groups. The required thickness of the cylinder is the largest, and the
raw materials are relatively wasteful. Generally suitable for large
cylinders.
3. Threaded type, the front and rear covers and the cylinder barrel have
large threads, and are connected by threads. The required thickness is smaller
than the bolt type, but it is still thicker, and a large nut is required to
ensure the assembly direction. Generally suitable for large long cylinders
4. Welding type, the back cover and the cylinder are welded into a whole, the
wall thickness of the cylinder is relatively thin, and the whole is relatively
compact. The material cost is not high, but the processing is the most difficult
and the processing cost is the highest.
Related products
-
Oblique Cut Lamination
Contact UsShearing is a common cutting method for silicon steel sheets. Silicon steel is sheared with a carbide blade, which can cut the required size and shape. Shear method on the thermal impact of silicon steel core is small, the kerf is smoother, but the shear force is more damage, easy to produce deformation and burr. Therefore, the shear method is suitable for cutting smaller lamination, the requirement of surface flatness is not too high occasions.
Our company has introduced advanced oblique cut equipment, which is able to cut large silicon steel core to meet more needs of customers. -
EI-lamination with air gap
Contact UsThe gap sizes of transformer lamination core can be customized.
-
Strong NdFeB magnet for permanent magnet motor, arc shape
Contact UsMostly used in the permanent magnet motor
-
Aerospace gear manufacturers
Contact UsThe company’s main products are high precision involute cylindrical gears,We specialize in manufacturing of gears products such as spur gear,helical gear, herringbone gear, external spline..
Reviews
There are no reviews yet.