Horizontal or vertical untwisting and twisting machine
Usage: Suitable for unwinding and twisting-reducing of the insulation core wires of data cables such as CAT-5, CAT-5E, CAT-6, CAT-7, and CAT-8.
Usage: Suitable for unwinding and twisting-reducing of the insulation core
wires of data cables such as CAT-5, CAT-5E, CAT-6, CAT-7, and CAT-8.
Features: Pre-twist before twisting, significantly reducing the impact of the
core wire on the structure of the wire during twisting. The twisting machine and
the pre-twist machine operate in tandem.
Machine composition: Consists of 500 active torque-reducing wire drawing
machines + 500 twisted pair machines.
| Model | JH500 | JH650 | ||
| Wire specification | MAX φ3.1mm | MAX φ4mm | ||
| Pitch range | 6-54.7mm | 9-120mm | ||
| Rotate speed | MAX 2500RPM | MAX 2200RPM | ||
| Max wire speed | MAX 120m/min | MAX 100m/min | ||
| Pay-off tension | Controlled by tension slider rod feedback | |||
| Take-up tension | Magnetic powder clutch control | |||
| Change the twist distance | Change the gear | Change the gear | ||
| Take-up bobbin | φ500mm | φ650mm | ||
| Power | 4KW | 5.5KW | ||
| Stranding direction | "S"or"Z" direction, Adjustable | |||
| Lifting system | Hydraulic automatic lifting | |||
| Brake system | Electromagnetic brake automatic brake when internal and external wire break | |||
| Automatic oil injection system | Using an electronic hydraulic oil injection system, the oil injection time can be adjusted properly. There is no need for manual addition of bearing grease. | |||
Related products
-
LFQ1300 Micro Computer Controlling Slitting Machine
Contact UsLFQ1300 Micro Computer Controlling Slitting Machine
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
Reviews
There are no reviews yet.