Industrial Flatwork Ironer
This machine uses variable frequency speed regulation, allowing users to select the appropriate ironing speed based on the needs of different fabrics and the ironing conditions.
| Ironing machine | |||||||||
| Model | YPAI-1800 | YPAI-2500 | YPAI-2800 | YPAI-3000 | YPAII-3000 | YPAIII-3000 | YPAIV-3000 | YPAIV-3300 | YPAV-3300 |
| Roller quantity | 1 | 1 | 1 | 1 | 2 | 3 | 4 | 4 | 5 |
| Roller dimension(mm) | 1800 | 2500 | 2800 | 3000 | 3000 | 3000 | 3000 | 3300 | 3300 |
| Motor (kw) | 0.75 | 0.75 | 0.75 | 0.75 | 1.5 | 2.2 | 3 | 3 | 4 |
| Heating way | Steam heated or Electric heated or Gas Heated | ||||||||
| Heating power | 24 | 30 | 36 | 36 | 72 | _ | _ | _ | |
| Rotate speed(m/min) | 0-7 | 0-7 | 0-7 | 0-7 | 0-16 | 0-20 | 0-26 | 0-26 | 0-30 |
| Nosie (dB) | ≤65 | ||||||||
| Votlage【V/P/HZ】 | Standard 380V 3PH+N 50Hz | ||||||||
| Overall Dimension (mm) LXWXH | 2800*1400*1500 | 3500*1400*1500 | 3800*1400*1500 | 4000*1400*1500 | 3500*2400*1500 | 13500*3400*1500 | 3500*4400*1500 | 4300*4400*1500 | 4300*5400*1500 |
| Net weight(kg) | 850 | 900 | 950 | 1000 | 2000 | 3000 | 4000 | 4500 | 5000 |
1. This machine uses variable frequency speed regulation, allowing users to
select the appropriate ironing speed based on the needs of different fabrics and
the ironing conditions.
2. The drum surface is heated using pressurized steam or infrared electric
quartz tubes, resulting in high thermal efficiency.
3. This machine utilizes a speed reducer, offering a high speed ratio, strong
overload capacity, and low noise.
4. The fabric transport system utilizes wide belts to prevent the
difficult-to-solve movement of large canvas during transport.
5. The steam inlet of the dryer uses a rotary joint, ensuring a leak-proof
seal and long service life.
Related products
-
Small EDM Wire Cut Machine
Contact UsEconomic high speed edm wire cut machine.
Main Features:
Roller for X/Y axis, also called hard rail ( V rail);
With ±3° taper as standard, ±15°, ±30°, ±45° as option;
Accuracy: ±0.01/300mm;
Roughness: Ra 1.0-2.5 µm;
Low consumption, material saving. -
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
20KVA/16KW Diesel Generator With Cummins Engine
Contact UsOur 16KW 20KVA diesel generator with Cummins engine is ideal for reliable power solutions.
Reviews
There are no reviews yet.