STZB、STZR Retentioner
The equipment is mainly used for conditioning and sterilization which before pelleting, extruding in feed production. When used with other equipment such as feeding and conditioner, it can greatly imp
Device Description
The equipment is mainly used for curing and sterilization before granulation and bulking in feed production process. By combining with other equipment such as feeding and tempering, the curing degree of materials can be greatly improved;
The external steam jacket or heat armour is heated,and the internal spiral blade conveys materials, which can ensure first-in first-out and reduce residue and cross-contamination.
Hot nail heating temperature rise fast, high thermal efficiency.
Driven by a shaft-mounted reducer,the operation is stable,and the special screed structure ensures the stable current of the pellet mill.
Equipped with variable frequency motor, conditioning time extends up to 3 minutes, can make the material fully cooked, optimize the pelleting process, and improve the capacity which can be increased by 10-15%.
The conditioning temperature can reach 85-100℃(adjustable), which can improve water resistance and effectively kill African swine fever virus and Salmonella.
Special homogenizing and dispersing mechanism, stable and uniform discharge
Related products
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
LFQ1300 Micro Computer Controlling Slitting Machine
Contact UsLFQ1300 Micro Computer Controlling Slitting Machine
-
High-efficiency activated carbon attachment device
Contact UsHigh-efficiency activated carbon attachment device can quickly absorb pollutants in exhaust gas. The exhaust gas containing pollutants is powered by a fan and enters the activated carbon adsorber under negative pressure.
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
Reviews
There are no reviews yet.