6.1GHz Wideband Video Transmitter
-Breakthrough wideband system utilizing custom PLL chips and wideband amplifiers, with an operational bandwidth encompassing the entire 5.8GHz and 4.9GHz extended channels.
-Rigorous quality control ensures all X-SPAN products undergo power calibration and thermal aging testing. All channels deliver power at nominal levels with exceptional consistency.
-Rugged aluminum alloy housing with integrated turbine fan for active cooling.
-Includes high-gain broadband antenna with system-level matching.
Features
-Breakthrough wideband system utilizing custom PLL chips and wideband amplifiers, with an operational bandwidth encompassing the entire 5.8GHz and 4.9GHz extended channels.
-Rigorous quality control ensures all X-SPAN products undergo power calibration and thermal aging testing. All channels deliver power at nominal levels with exceptional consistency.
-Rugged aluminum alloy housing with integrated turbine fan for active cooling.
-Includes high-gain broadband antenna with system-level matching.
Specification
VTX 5W
| Channel customer | 96CH | Polarization | Linear |
|---|---|---|---|
| Modulation type | FM | Radiation pattern | Omni-directional |
| RF Power | PIT-25mW-200mW-1W-5W | Gain | ≤4.6dBi |
| Power Supply | DC 7-30V | V.S.W.R | ≤1.5 |
| Antenna Port | SMA 50 Ohms | Cable | RG402 |
| Operating Temperature | -10℃~+70℃ | Connector | SMA Male |
| Control Protocol | IRC Tramp | Impedance | 50 Ohm Nominal |
| Dimension | L44XW28.6XH14.7mm | Dimension | H163 X W43mm |
| Weight | 25.6g | Weight | 11g |
Frequency Table
| CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | ||
|---|---|---|---|---|---|---|---|---|---|
| 1 | BAND A | 5474 | 5492 | 5500 | 5528 | 5546 | 5564 | 5582 | 5600 |
| 2 | BAND b | 5362 | 5399 | 5436 | 5473 | 5500 | 5547 | 5584 | 5621 |
| 3 | BAND E | 5300 | 5348 | 5366 | 5384 | 5400 | 5420 | 5438 | 5456 |
| 4 | BAND F | 5129 | 5159 | 5189 | 5219 | 5249 | 5279 | 5309 | 5339 |
| 5 | BAND r | 4990 | 5020 | 5050 | 5080 | 5110 | 5150 | 5170 | 5200 |
| 6 | BAND P | 5333 | 5373 | 5413 | 5453 | 5493 | 5533 | 5573 | 5613 |
| 7 | BAND L | 4875 | 4884 | 4900 | 4958 | 4995 | 5032 | 5069 | 5099 |
| 8 | BAND U | 5960 | 5980 | 6000 | 6020 | 6030 | 6040 | 6050 | 6060 |
| 9 | BAND O | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
| 10 | BAND H | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 |
| 11 | BAND T | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5945 |
| 12 | BAND n | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
Power Levels
| Values | P0 | P1 | P2 | P3 | P4 |
|---|---|---|---|---|---|
| Power Level | PIT | 25mW | 200mW | 1w | 5W |
| Typ. | -40dBm | 14dBm | 23dBm | 30dBm | 37dBm |
Wiring and Operation
Properly install the antenna before use!
-
The included antenna is fully matched to the VTX's operating frequency band and requires no trimming. If using a different antenna, ensure its operating frequency matches the VTX!
-
Improper operation may impair VTX performance or cause damage to the VTX!
-
Controlled using a single button, the button integrates RGB lighting, blue for band, red for channel, and green for power level.
-
When there is no operation, the RGB LED blinks cyclically, the number of times the RGB blinks represents the current VTX status (when the green LED is always on, the VTX enters PITMODE).
-
Long press the button to enter VTX setting, at this time the RGB lights are lit alternately, release the button under the corresponding color light to enter the corresponding function setting. At this time, short press the button to adjust the value.
-
For setup via the flight controller, connect the DATA pin and use the IRC Tramp protocol.
Related products
-
Privacy Divider Wind Screen
Contact UsMaterial HDPE +UV Stabilized Weight 35gsm-350gsm Shade rate 10-99% Net Width Any size within 6m Roll Length 5m,10m,30m,50m,100m,200m on request Colors Black ,White ,Green and ect.
-
Fixed RFID Readers (4/8-Port) With SDK For Integrators
Contact UsFixed RFID Reader & AIDC Product Navigation from SeeMore IoT, good for sercurity and protection
-
Reflective Road Studs
Contact UsReflective road studs (also known as protruding road markers) are critical road safety facilities. Using retro-reflective technology, they improve lane identification in low-visibility conditions such
-
Safety Cycling Helmet with Light
Contact Us1：Smart Lighting System: Equipped with front and rear LED lights, the helmet features customizable lighting modes (steady, flashing, SOS) to ensure visibility in low-light conditions. The rear light incorporates a 270° warning beam, synchronized with braking signals via Bluetooth for real-time safety alerts.
2：Ergonomic Design: Optimized ventilation channels and lightweight structure (approx. 350g) reduce wind resistance while maintaining breathability. Magnetic snap-on goggles with anti-fog coating provide clear vision.
3：Multi-Scenario Adaptability: Certified to CE EN1078 and GB811-2022B standards, it suits urban commuting, mountain biking, and outdoor adventures. Available in sizes S-XL (48-64cm head circumference) and multiple color options (matte black/blue, gradient finishes).
4：Battery & Charging: Built-in 600mAh lithium battery offers 6-10 hours runtime. USB-C fast charging fully replenishes power in 2 hours.
Reviews
There are no reviews yet.