BG3FP12-Red Phosphorus

Typical molding process

Dry	Drum wind oven: 80～110℃, 4～6h； Cycling warm air: 80～110℃,4～6h； Vacuum drying oven： 80～100℃,3～4h；
Processing temperrature	Feed section：225～240℃ Compressing section：240～250℃ Metering secion：240～250℃
Injection pressure	70～130MPa
Packing pressure	40～90 Mpa
Mold temperature	60～90℃
Back pressure	5～15Mpa

BG3FP12

Test Item	Test Standard	Test Condition	Unit	Value
Others
Product Identification	ISO1043	——	——	PA6-GF15FR
Filler Content	ISO3451-1	——	%	15
Density	ISO1183	23℃	g/cm³	1.32
Molding shrinkage(parallel/ normal)	ISO294-4	——	%	/
Melt Flow Rate	ISO1133	250℃，2.16kg	g/10min	0.4/0.8
Viscosity number	ISO307	96%H2SO4,0.5g/dl	ml/g	145
Mechanical
Flexural Strength	ISO178	23℃，2mm/min	MPa	150
Flexural Modulus	ISO178	23℃，2mm/min	MPa	5200
Tensile Strength	ISO527	Type I spline,50mm/min	MPa	105
Tensile Module	ISO527	Type I spline,1mm/min	MPa	/
Tensile Strain at Break	ISO527	Type I spline,50mm/min	%	3
Charpy Notched Impact Strength	ISO179/1eA	23℃	kJ/m2	6/C
Charpy Unnotched Impact Strength	ISO179/1eU	23℃	kJ/m2	50/C
Thermal
Melting Temperature	ISO11357	——	℃	220
Heat Distortion Temperature	ISO75-2	0.45MPa	℃	/
Heat Distortion Temperature	ISO75-2	1.8MPa	℃	180
Electrical
CTI	IEC60112	A	V	＞300
Volume Resistivity	IEC60093	——	Ω•cm	1013
Surface resistivity	IEC60093	——	Ω	1012
Flammability
Flammability	UL-94	3.2mm	Class	V-0

All is typical data, only for reference, not the permit of quality assurance.

Reviews

There are no reviews yet.

Be the first to review “BG3FP12-Red Phosphorus”