Supersonic Spray ( HVOF ) coating services
Plasma powder overlay welding process uses water-cooled copper nozzle to compress the arc column of free arc, so as to make the energy more concentrated and the gas in the arc column fully ionized. Such arc is called plasma arc.
Plasma powder overlay welding process uses water-cooled copper nozzle to compress the arc column of free arc, so as to make the energy more concentrated and the gas in the arc column fully ionized. Such arc is called plasma arc. The plasma arc energy is highly concentrated and the temperature reaches a very high degree ( about 1 ~ 20,000 degrees ). The generated high temperature rapidly heats and melts the alloy powder with the substrate surface, forming a high-quality alloy welding layer on the substrate surface.
Star-weld series plasma powder welding system designed and developed by Kennametal Stellite is recognized as one of the most successful plasma welding systems in the world, and has more than 40 years of experience in plasma powder welding process application, which can provide customers with one-stop solutions from system design customization, coating material selection to process development.
Plasma powder surfacing process has been accepted by more and more customers because of its low dilution rate of welding layer, little influence on substrate, easy automation and high quality reproducibility, and has been successfully applied in many fields such as automobile, electric power and petrochemical industry.
Related products
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs! -
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
Reviews
There are no reviews yet.