Copper Bus Bar
Copper busbars are high-current conductive products suitable for electrical applications such as high- and low-voltage electrical equipment, switch contacts, power distribution equipment, and bus ducts.
The quality requirements of copper busbar are implemented according to GB/T 5585.1-2005/60364-5-523.
Due to their superior conductivity to aluminum, copper busbars are widely used in electrical equipment, particularly complete power distribution systems.
Copper busbars are typically used for the A, B, C, and N phase busbars, as well as the PE busbar in distribution cabinets. Copper busbars are primarily used on secondary circuits, including high-current phase, neutral, and ground wires. They are also used to connect high-current primary components within electrical cabinets.
Related products
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
-
MA-(0.8~4MM)×1300MM Steel Coil Slitting Equipment
Contact UsMA-(0.8~4MM)×1300MM Steel Coil Slitting Equipment can process the slitting of the coil with different sizes to small strips for processing various kinds of metal coil materials.
-
Waste Tyre Recycling Production Line
Contact UsPresently, waste tire recycling equipment provided by our domestic competitors usually can produce 20-40 meshe rubber powder under normal temperature.
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
Reviews
There are no reviews yet.