NK Air end
The product includes the following models: NK-4PV)、NK-7.5PV、NK-10PV、NNK-15PV、NK-20PV、NK-20PV、NK-30PV
| MODEL NO. | POWER (HP) |
VOLTAGE | PHASE | Frequency | MAX.PRESSURE (BAR) |
AIR DELIVERY (L/MIN) |
| NK-4PV | 4HP | 220V | 1PH | 50HZ | 8/10 BAR | 300 |
| NK-4PV | 4HP | 380V | 3PH | 50HZ | 8/10 BAR | 300 |
| NK-7.5PV | 7.5HP | 380V | 3PH | 50HZ | 8/10 BAR | 680 |
| NK-7.5PV | 7.5HP | 380V | 3PH | 50HZ | 16BAR | 330 |
| NK-10PV | 10HP | 380V | 3PH | 50HZ | 8/10 BAR | 1050 |
| NK-10PV | 10HP | 380V | 3PH | 50HZ | 16BAR | 500 |
| NK-15PV | 15HP | 380V | 3PH | 50HZ | 8/10 BAR | 1450 |
| NK-15PV | 15HP | 380V | 3PH | 50HZ | 16BAR | 700 |
| NK-20PV | 20HP | 380V | 3PH | 50HZ | 8/10 BAR | 2000 |
| NK-20PV | 20HP | 380V | 3PH | 50HZ | 16BAR | 950 |
| NK-30PV | 30HP | 380V | 3PH | 50HZ | 8/10 BAR | 3000 |
| NK-30PV | 30HP | 380V | 3PH | 50HZ | 16BAR | 1600 |
Related products
-
RO EDI
Contact UsOrisun group is specialize in supplying one stop solutions for whole manufacture chain. developing and manufacturing reverse osmosis water treatment for over 20 years.Our equipment is widely used in pharmacy industry , food and beverage industry , cosmetic industry , chemical industry, etc.As a leading provider of water treatment solutions ,our mission is to supply clean , healthy and safe water for all over the world.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
Small EDM Wire Cut Machine
Contact UsEconomic high speed edm wire cut machine.
Main Features:
Roller for X/Y axis, also called hard rail ( V rail);
With ±3° taper as standard, ±15°, ±30°, ±45° as option;
Accuracy: ±0.01/300mm;
Roughness: Ra 1.0-2.5 µm;
Low consumption, material saving.
Reviews
There are no reviews yet.