BG6SF11C

BG6SF11C-Typical molding process

Dry	Drum wind oven： 100～120℃，4～6h； Cycling warm air： 100～120℃，4～6h； Vacuum drying oven： 100～120℃，3～4h；
Processing temperrature	Feed section：225～235℃ Compressing section：240～260℃ Metering secion：240～275℃
Injection pressure	70～130MPa
Packing pressure	40～90 MPa
Mold temperature	70～100℃
Back pressure	8～15MPa

BG6SF11C

Test Item	Test Standard	Test Condition	Unit	Value
Others
Product Identification	ISO1043	——	——	PA6-GF30
Filler Content	ISO3451-1	——	%	30
Density	ISO1183	23℃	g/cm³	1.37
Molding shrinkage(parallel/ normal)	ISO 294-4	——	%	0.4/0.6
Viscosity number	ISO307	96%H2SO4,0.5g/dl	ml/g	88
Mechanical
Flexural Strength	ISO178	23℃，2mm/min	MPa	235
Flexural Modulus	ISO178	23℃，2mm/min	MPa	8200
Tensile Strength	ISO527	Type I spline,50mm/min	MPa	165
Tensile Module	ISO527	Type I spline,1mm/min	MPa	/
Tensile Strain at Break	ISO527	Type I spline,50mm/min	%	3
Charpy Notched Impact Strength	ISO179/1eA	23℃	kJ/m2	15
Charpy Unnotched Impact Strength	ISO179/1eU	23℃	kJ/m2	78
Thermal
Melting Temperature	ISO11357	——	℃	220
Heat Distortion Temperature	ISO75-2	0.45MPa	℃	215
Heat Distortion Temperature	ISO75-2	1.8MPa	℃	200
Electrical
CTI	IEC60112	A	V	/
Volume Resistivity	IEC60093	——	Ω•cm	1013
Surface resistivity	IEC60093	——	Ω	1012
Flammability
Flammability	UL-94	1.6mm	Class	HB
GWIT	IEC60695	——	℃	/
GWFIT	IEC60695	——	℃	/

All is typical data, only for reference, not the permit of quality assurance.

Reviews

There are no reviews yet.

Be the first to review “BG6SF11C”