ZJ/ZJP Series Roots Vacuum Pumps
The ZJ series Roots vacuum pump is a positive displacement vacuum pump, also known as a mechanical booster pump.
I. Product Description and Main Applications:
The ZJ series Roots vacuum pump is a positive displacement vacuum pump, also
known as a mechanical booster pump. It is one of the primary vacuum pumps
currently used to achieve medium and high vacuum levels. Its operating principle
is similar to that of a Roots blower, utilizing two figure-eight rotors that
rotate synchronously within the pump housing to complete the suction and exhaust
processes.
The ZJ series Roots vacuum pump's greatest advantage is its high pumping rate
at low inlet pressures and its ability to achieve a relatively high ultimate
vacuum. Because the pump's main components, such as the pump housing, rotor, and
end cap, are free of relative motion and contact, the pump offers stable
performance, a long service life, and minimal maintenance. Currently, this pump
is widely used in vacuum smelting, vacuum welding, vacuum casting, vacuum
spraying, vacuum drying, vacuum dynamic testing, chemical and pharmaceutical
processing, and electrical vacuum device manufacturing, all within the vacuum
range achievable by this type of pump. To address processes in the chemical and
pharmaceutical industries that require the extraction of large quantities of
water vapor and solvents, our company has improved the sealing structure between
the pump chamber and the bearing cavity of the ZJ series Roots vacuum pump. This
significantly reduces the emulsification of pump oil in the bearing and gear
cavities, making the ZJ series Roots vacuum pump more suitable for use with
water ring vacuum pumps to extract large quantities of water vapor and
solvents.
Table 1 Main Technical Parameters of the ZJ Roots Vacuum Pump
|
Model |
ZJ-30 |
ZJ-70 |
ZJ-150 |
ZJ-300 |
ZJ-600 |
ZJ-1200 |
|
|
Pumping Rate (L/S) |
30 |
70 |
150 |
300 |
600 |
1200 |
|
|
Ultimate pressure (Pa) |
5×10-2 |
||||||
|
Maximum allowable pressure differential (Pa) |
8000 |
8000 |
6000 |
4500 |
4500 |
3000 |
|
|
Speed (r/min) |
2770 |
2870 |
2900 |
1450 |
2900 |
1450 |
|
|
Caliber(mm) |
air intake |
50 |
80 |
100 |
150 |
150 |
300 |
|
exhaust port |
40 |
50 |
100 |
150 |
150 |
300 |
|
|
Net weight (kg) |
75 |
100 |
215 |
480 |
503 |
1580 |
|
|
Equipped power (kW) |
0.75 |
1.5 |
3 |
4 |
5.5 |
11 |
|
|
It is recommended to use a backing pump |
2X-4 |
2X-8 |
2X-15 |
2X-30 |
2X-70 |
Two 2X-70 |
|
Table 2 Main technical parameters of ZJP Roots vacuum pump
|
Model |
ZJP-30 |
ZJP-70 |
ZJP-150 |
ZJP-300 |
ZJP-600 |
|
|
Pumping Rate (L/S) |
30 |
70 |
150 |
300 |
600 |
|
|
Ultimate pressure (Pa) |
5×10-2 |
|||||
|
Starting pressure (Pa) |
101326 |
|||||
|
Maximum allowable pressure difference (Pa) |
8000 |
6000 |
6000 |
5000 |
4000 |
|
|
Speed (r/min) |
2770 |
2870 |
2900 |
1450 |
2900 |
|
|
Caliber(mm) |
air intake |
50 |
80 |
100 |
150 |
150 |
|
exhaust port |
40 |
50 |
100 |
150 |
150 |
|
|
Net weight (kg) |
75 |
100 |
215 |
500 |
520 |
|
|
Power (kW) |
0.75 |
1.5 |
3 |
4 |
5.5 |
|
|
Recommended backing pump |
2X-4 |
2X-8 |
2X-15 |
2X-30 |
2X-70 |
|
Related products
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
PP PE LDPE HDPE Film Recycled Plastic Washing Machine Recycling Production Line For Sale
Contact UsThe recycling washing line is mainly used to recycle all kinds of plastics, such as film, agricultural film, greenhouse film, woven bags and etc. it can also recycle waste plastic bottles such as HDPE, LDPE, PP, etc. Our output ranges from 300 kg to 2000 kg per hour. Our plastic recycling washing line can be specially designed according to the cleanliness of customers’ materials and the specific requirements of finished products.
-
OPTIMIZING CROSS CUT SAW MAXCUT F18S+SENSIT 005
Contact UsHigh speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line. -
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
Reviews
There are no reviews yet.