CLW-7000 automatic stamping production line of photovoltaic frame
CLW-7000 automatic stamping production line of photovoltaic frame is the 7th generation product launched by our company in 2025.
https://www.calowenauto.com/clw-7000-automatic-stamping-production-line-of-photovoltaic-frame.html
CLW-7000 automatic stamping production line of photovoltaic frame is the 7th generation product launched by our company in 2025.After more than 1 year of unremitting efforts,accumulation and reference,the company's R&D team has successfully developed anew generation of automatic stamping production line of photovoltaic frame,which has been significantly improved in production efficiency,product quality,energy saving and environmental protection, intelligent control and other aspects compared with the previous generation of production line.
Technical parameters
|
Name |
Automaticstampingproduction lineofphotovoltaicframe (longframe) |
Automaticstampingproduction lineofphotovoltaicframe (shortframe) |
|
Model |
CLW-25 |
CLW-15 |
|
Processinglengthrange(mm) |
1600～2500 |
990～1500 |
|
Processingsectionrange(mm) |
Bsidewidth:30-40,Csidewidth:10-35 |
|
|
Workingbeat(s) |
≤1.5 |
≤1.5 |
|
Angelaccuracy(°) |
±0.1 |
±0.1 |
|
Cuttinglengthaccuracy(mm) |
±0.15 |
±0.15 |
|
Qualifiedrateofprocessing |
99.8% |
99.8% |
|
Staffing(person/station) |
2.5 |
2.5 |
|
Ratedpower(kw) |
24 |
24 |
|
Externaldimensions(mm) |
16000×6000×2850 |
16000×6000×2850 |
Product advantages
1. The feeding method of sawing unit adopts the pulling material system,which improves the adaptability for twisted profiles.
2. The feeding of sawing unit is driven by electric cylinder,which effectively improves the processing quality of the workpiece.
3. The stamping molds only need to replace the punch head and inserted plate,which effectively reduces the costs.
4. Intelligent detection including length,mounting hole,bending,twisting,aluminium angle and water leakage hole detection.
5. Five sets of aluminium angle cartridges are set on one side of short frame stamping unit,and the aluminium angle capacity is greatly increased.
6. The finished products and defective products are automatically separated by upper and lower double-layer conveyor belt.
Related products
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
UT 1.6523/8620/20CrNiMoA Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Blockund Bar
Contact Us1.6523 Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Block/Round Bar
-
High-efficiency activated carbon attachment device
Contact UsHigh-efficiency activated carbon attachment device can quickly absorb pollutants in exhaust gas. The exhaust gas containing pollutants is powered by a fan and enters the activated carbon adsorber under negative pressure.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
Reviews
There are no reviews yet.