External Suction Arm
Features:
● Persistent tightness
● Arm keeps position due to self-supporting design
● Fast operation due to particularly flexible adjustment
● User-friendly due to particularly smooth movement of the hood with one hand
● Various options to connect the exhaust arms to fans, stationary devices or via duct work to central extraction and filtration systems
Introduction:
External joint suction arm is suitable for sucking large amount offume, vapor
or non-explosive dust. The typical application workplace is metal processing and
other industrial workplace where large amount exhaust treatment is required.
The external joint suction arm can be applied to welding generates a lot of
flying sparkles, laser or manual plasma cutting, metal spraying, grinding, or
other processing that require mobile suction with excellent arm balance and easy
positioning.
Parameters:
|
Type & Specification |
External Suction Arm |
Extension Rod |
Overlay External Suction Arm |
|
Arm Length |
Hose Diameter |
Rod Length |
Hose Diameter & Length |
|
2 m |
130/160mm |
1/1.5/2 m |
160mm, 1+2 m |
|
3 m |
130/160mm |
2.5/3/4 m |
160mm, 1+3 m |
Applications:
Welding training center case
Suction arm with 2m extension rod
2m Suction arm case
Related products
-
TNV direct fired incinerator
Contact UsDesign and manufacture by using the German EN12753 safety standard and the European ED. It is used Metal Painting and Printing LED Drying:
1. For stable industrial and mining conditions with a high temperature concentration of 1.5g/M3 or above.
2. Industrial and mining conditions with requirements for thermal energy recovery and utilization.
3. Industrial and mining conditions required for the operation of independent drying rooms.
4. Special effects on projects that reduce emissions and increase production -
KPR Zeolite Rotary Concentrator
Contact UsUnder low temperature conditions, high air volume organic waste gas passes through the KPR Zeolite Rotary Concentrator, and VOC molecules adsorb its surface.
-
KSZHDM-03 Combined Grinding Dust Collector
Contact UsFeatures:
● Reasonable structure design facilitates dust settlement
● Convenient dust removal, automatic dust removal to ensure the continuity and efficiency of production
● Low noise and easy to use
● PLC control system control, humanized operation panel design, easy to use
● High filtration accuracy, high efficiency and long service life -
Annual output of 120,000 tons of DMF, 20,000 tons of NMF project – waste liquid and waste gas incineration treatment system
Contact UsThis project plans to build a set of waste liquid and waste gas direct-fired incinerator. Including but not limited to construction drawing design, waste gas feeding system, waste liquid feeding system, combustion assistance and feeding system, incineration system, waste heat recovery system, denitration system, smoke exhaust system, auxiliary system, electronic control instrument system, etc.
Reviews
There are no reviews yet.